EasyManua.ls Logo

Honeywell HW-AV-LTE-M - Section 4: Central Station Communications; Prerequisites; Receiving a CLSS Account; Assigning the Device to a Customer

Honeywell HW-AV-LTE-M
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 4: CENTRAL STATION COMMUNICATIONS
The CLSS Pathway sends events from a panel to a specified Central Monitoring Station according to the settings in the CLSS Site
Manager and CLSS App.
4.1 PREREQUISITES
The following are required to set up CLSS Pathway communications:
01.
The organization’s administrator configuring CLSS Site Manager must have a CLSS account.
02.
A technician installing the CLSS Pathway must have a CLSS account.
03.
The CLSS Site Manager should already have details of the Customer, Site, and Building.
04.
Central station details such as its account number, DNIS number, and prefix number.
05.
Serial number and the configuration key of the CLSS Pathway. (Available on the Quick Start Guide.)
4.2 RECEIVING A CLSS ACCOUNT FOR YOUR ORGANIZATION
Configuring the CLSS Pathway requires a CLSS account. If you already have the CLSS account, then proceed to section 4.3,
"Assigning the Device to a Customer".
If You Do Not Yet Have a CLSS Account. Your organization's Administrator* should visit fire.honeywell.com or scan the QR code
below for instructions to request a CLSS Account:
NOTE: The Administrator is the person who can sign on behalf of the organization.
Using the CLSS account received, the Administrator should add customers and employees in CLSS Site Manager. Refer to the help
section of CLSS Site Manager for more information.
4.3 ASSIGNING THE DEVICE TO A CUSTOMER
Associate your device with a CLSS Site and Building for your Customer as follows:
01.
Log into the CLSS mobile App.
02.
Tap the three dots at the top-right corner of the dashboard
03.
Tap Install Dialer Capture.
04.
Follow the on-screen instructions.
4.4 CONFIGURING ALERTS IN THE CENTRAL STATION
4.4.1 ADD A CENTRAL STATION TO YOUR CLSS ACCOUNT
The organization’s Administrator should perform the following for each central station associated with the panel.
Honeywell Connected Life Safety Services | Honeywell Connected Life Safety Services
Installation and Operation Manual | REV. B
11
Wednesday, February 28, 2024

Table of Contents

Other manuals for Honeywell HW-AV-LTE-M

Related product manuals