INTELLIGUARD 9000
74-3046
12
Defining Customer Information Table
1. In the new screen, press F2 to display the Customer Information table.
See Fig. 6.
Fig. 6. Customer Information table. User enters customer information in this table.
2. Click once in the I.D. field.
3. Type the desired I.D. number or name.
4. Press Tab to move to the Name field.
5. Type the customer name in the Name field.
6. Press Tab to get to the Address field.
7. Type the customer address in the Address field.
NOTE: Press Tab to move to the next line in the Address field.
8. Press Tab to get to the Telephone field.
9. Type the customer’s telephone number in the Telephone field.
10. Tab to the Comments field.
11. Type any messages in the Comments field.
12. Click OK or press Enter to return to the main screen.
NOTE: Pressing Cancel at any time undoes all entries in the active screen.
13. Click File to display the File pull-down menu.
14. Click Save to save the Customer file.
NOTE: Honeywell recommends saving the file periodically during and after
completing each table.
To Next Page
Loading...
