Honeywell INTELLIGUARD 9000 Installation Instructions

INSTALLATION INSTRUCTIONS
7
4
-
3
0
4
7
-
1
® U.S. Re
g
istered Trademark
Cop
y
ri
g
ht © 2001 Hone
y
well • All Ri
g
hts Reserved
U.L. 4-01
Intelliguard 9000™
SECURITY SYSTEM
WARNING:
This e
q
uipment
g
enerates, uses, and can radiate radio fre
q
uenc
y
ener
gy
, and if not installed and used in accordance
with the Instructions Manual, ma
y
cause interference with radio communication. It has been tested and found to compl
y
with the
limits for a Class A computin
g
device pursuant to Subpart J of Part 15 of FCC Rules, which are desi
g
ned to provide reasonable
protection a
g
ainst such interference when operated in a commercial environment. Operation of this e
q
uipment in a residential
area is likel
y
to cause interference, in which case, users at their own expense will be re
q
uired to take whatever measures ma
y
be
re
q
uired to correct the interference. An
y
unauthorized modification of this e
q
uipment ma
y
result in the revocation of the owner's
authorit
y
to continue its operation.
GENERAL
The Intelli
g
uard 9000™ Securit
y
S
y
stem
(
I9000
)
protects
offices, warehouses and other businesses as part of the
Enterprise Buildin
g
s Inte
g
rator™
(
EBI
)
S
y
stem. The I9000
uses Hold-up
(
HU
)
Detectors to alert outside help to a current
hold-up and Hall Effect Door Switches
(
HEDS IV
)
to monitor
door openin
g
s. Other detection devices and outputs can be
linked to the I9000 when the
y
conform to the re
q
uirements in
form no. 74-3035, Intelli
g
uard 9000 Specification Data.
OVERVIEW
These instructions describe the steps for wirin
g
and
connectin
g
the I9000 devices, pro
g
rammin
g
field devices and
connectin
g
the I9000 to the EBI Securit
y
S
y
stem. The
y
do not
contain instructions for pro
g
rammin
g
the I9000 with a PC.
Refer to form no. 74-3046, Intelli
g
uard 9000 Pro
g
rammer’s
Guide for pro
g
rammin
g
instructions. Also see form no. 74-
3035, Intelli
g
uard 9000 Specification Data and form no. ZD34-
002-100, EBI Installation Guide.
ASSUMPTIONS
It is assumed that:
— The location of each part is planned before installation
be
g
ins.
— Installer has a basic understandin
g
of electronics.
—La
y
out plan for I9000 is complete.
There is a specific order for installin
g
the I9000. Refer to the
followin
g
installation instructions.
(
The installer ma
y
chan
g
e
the order for mountin
g
and connectin
g
the hardware, when
appropriate.
)
INSTALLATION
When Installing this Product . . .
1.
Read these instructions carefull
y
. Failure to follow the
instructions can dama
g
e the product or cause a hazard-
ous condition.
2.
Check the ratin
g
s
g
iven in the instructions and on the
product to make sure the product is suitable for
y
our
application.
3.
The installer must be a trained, experienced, licensed
(
where re
q
uired
)
service technician.
4.
After completin
g
installation, use these instructions to
check out the product operation.
Components
— 8003-217 Remote Intelli
g
ent Power Suppl
y
(
RIPS
)
.
— 8003-220 Area Ke
y
pad
(
KID
)
.
— 8003-238 Complete 6-Input Concentrator
(
BIC-6
)
.
— 8003-242 2-Input Concentrator
(
BIC-2
)
.
— 8003-277 Ke
y
pad Control Center
(
CC2
)
.
— 8003-283 Hall Effect Door Switch
(
HEDS IV
)
Complete
Assembl
y
(
includes Sensor and Ma
g
net Assembl
y)
.
— 8003-284 2-Input Concentrator Hold-up Actuator
(
BIC-2 HU
)
.
— 8003-286 Multiple Output Module
(
MOM
)
.
— 8003-332 I9000 Control Unit
(
CU
)
in casin
g
.
— Transformer, 16 Vac, 37 to 40 VA.
— RS-232 cable and connectors.
— RS-485 cable and connectors.
NOTE: The MOM currentl
y
is not CE certified. In countries
that re
q
uire certification for all parts, confi
g
ure one or
more BIC-6s as an output device. Confi
g
urin
g
the
BIC-6 for output is described later in these instruc-
tions.
Parts Available (Not Included)
— 8003-302 HEDS IV
L
Bracket.
— 7003-162 AX-5L Conduit Adapter.
— 4545-059 BIC-2/BIC-2 HU Optional Rela
y
.

Honeywell INTELLIGUARD 9000 Specifications

General

Brand	Honeywell
Model	INTELLIGUARD 9000
Category	Security System
Language	English