Honeywell INTELLIGUARD 9000 - User Manual

1
INTELLIGUARD
9000
™
USER’S GUIDE
INTELLIGUARD 9000
™
SECURITY SYSTEM

Summary

Control Center

Area Keypad

Quick User Guide

Arming

Arm an Area with a Code

Details the procedure for arming a specific area using a security code.

Arm Several Areas with a Code

Describes how to arm multiple areas simultaneously using a security code.

Disarming

Disarm an Area with a Code

Outlines the steps to disarm a specific area using a security code.

Disarm Several Areas with a Code

Explains the process of disarming multiple areas concurrently using a code.

Disarm an Area with two Codes

Testing

Testing Hold-Up Actuators

Guides the user through testing the functionality of hold-up actuators.

Testing all Detectors

Explains how to perform a walk test for all system detectors.

Viewing

View Arm Status

View Alarm Status

Describes how to view the current alarm status of various system areas.

View Area Status

Bypassing a Point

Bypass a Point

Explains how to temporarily disable a specific detection point.

Force Arming

Force Arm of a Defective Area

Explains how to force arm an area even if a fault is detected.

ID Number Management

Add New ID Number

Guides the user through the process of adding a new ID number to the system.

Delete ID Number

Modify ID Number

Code Entry

Code Entry

Enter New Code

Modify Code

Honeywell INTELLIGUARD 9000 Specifications