Honeywell INTELLIGUARD 9000 - Resetting Detectors; Reset Detectors

27
RESETTING
DETECTORS
1. Reset Detectors
RESETTING DETECTORS
ACTION MESSAGE SIGNAL
Press
ID ? – –
Enter your ID #. ID ? # #
CODE ? – – – –
Enter your CODE #. MODE MENU 2 BEEPS
1—SYSTEM STATUS
Press until you reach:
RESET DET. (HU)
MODE MENU
2—RESET DET. (HU)
To accept
RESET DET. (HU)
press
MODE MENU
2—RESET DET. (HU) 2 BEEPS
NOTE 1: All detectors are now reset.
Consult the “VIEW SYSTEM EVENTS” section.
— The detectors activation date and time are in UPPER CASE characters.
— The detectors reset date and time are in LOWER CASE characters.
Consult the “REFERENCE GUIDE section for a description of the message.
To exit, press
** INTELLIGUARD 9000 **
yy/mm/dd hh:mm
MODE