Honeywell INTELLIGUARD 9000 - Unbypassing a Point; Unbypass Point

31
1. Unbypass Point
ACTION MESSAGE SIGNAL
Press
ID ? – –
Enter your ID #. ID ? # #
CODE ? – – – –
Enter your CODE #. OPTION MENU 2 BEEPS
1—BYPASS A POINT
Press until you reach:
UNBYPASS A POINT
OPTION MENU
2—UNBYPASS A POINT
To accept
UNBYPASS A POINT,
press
POINT ? – – –
Enter the POINT # that
you want to unbypass.
To view additional infor-
mation on the description
of the POINT, press
at 105 warehouse door 5
byp id01
NOTE 1: EXAMPLE ONLY
“a1 105 warehouse door 5” indicates that POINT # 105 is in AREA # 1 located in
the warehouse on Door # 5. “byp id 01” indicates that the user with ID # 01 re-
enabled that POINT. Consult the “REFERENCE GUIDE” section for a description
of the message.
To accept the selected
POINT, press
SUCCESS 1 2 BEEPS
To select another
POINT, press
POINT ? – – –
In order to select another
bypassed point, repeat the
steps illustrated above.
UNBYPASSING
A POINT
OPT
UNBYPASSING A POINT