Honeywell INTELLIGUARD 9000 - View Area Status

23
3. View Area Status
ACTION MESSAGE SIGNAL
Press
ID ? – –
Enter your ID #. ID ? # #
CODE ? – – – –
Enter your CODE #. MODE MENU 2 BEEPS
1—SYSTEM STATUS
To accept
SYSTEM STATUS,
press
STATUS MENU
1—ARM STATUS
Press until you reach:
AREA STATUS
STATUS MENU
3—AREA STATUS
To accept
AREA STATUS,
press
AREA ? –
Enter the AREA # for A # ARMED/DISARMED
which you want a
system status.
NOTE 1: “ # “ indicates the selected AREA number.
Actual statuses of the selected AREA are displayed one by one on the screen.
Consult the “REFERENCE GUIDE” section for a description of the message.
To exit
AREA STATUS,
press
STATUS MENU
3—AREA STATUS
To exit
SYSTEM STATUS,
press
MODE MENU
1—SYSTEM STATUS
To exit, press
** INTELLIGUARD 9000 **
yy/mm/dd hh:mm
MODE