Honeywell INTELLIGUARD 9000 - Arm Several Areas with a Code

13
3. Arm Several Areas with a Code
ACTION MESSAGE SIGNAL
Press
AREA ? –
Press
ID ? – –
Enter your ID #. ID ? X X
CODE ? – – – – 2 BEEPS
Enter your CODE
AREA : 12345 2 BEEPS
The areas which are disarmed and you have authorization to arm are shown. Pressing the
area number will remove or add an area to the selection.
Press
SYSTEM TEST
comes on momentary
REQUEST ACCEPTED
AREA 12345 ARMED ACKNOWLEDGE
TONE THEN EXIT
DELAY BEEP TONE
STARTS
NOW EXIT THE PREMISES