Honeywell INTELLIGUARD 9000 - Force Arming; Force Arm of a Defective Area

35
1. Force Arm of a Defective Area
ACTION MESSAGE SIGNAL
A1 OFFICE DOOR 2 NEGATIVE TONE
NOTE 1: Example: “A1 OFFICE DOOR 2”
AREA #1, Office door #2 is open or door contact is defective.
Consult the “REFERENCE GUIDE” section for a description of the message.
NOTE 2: If more than one problem is detected, the first problem is displayed for two
seconds, then the second problem for another two seconds, and so on until all
corrections are made or accepted.
To accept the problem,
press
FORCE ARMING ? _
To accept
FORCE ARM,
press
ID ? – –
Enter your ID #. ID ? # #
CODE ? – – – – 2 BEEPS
Enter your CODE #.
REQUEST ACCEPTED
AREA# ARMED ACKNOWLEDGE
TONE THEN EXIT
DELAY BEEP TONE
STARTS
To stop the long tone
and exit, press
Now exit the premises
FORCE ARMING
FORCE ARMING