INTELLIGUARD 9000
74-3046
4
OVERVIEW
PRO9000 Software programs the I9000 from an IBM compatible PC or laptop PC.
PRO9000 creates, saves, copies, and prints the files that the I9000 uses to operate.
This programming guide describes the steps for setting up the I9000 System on a
computer and transferring that information to the I9000. It also describes how to
transfer information from the I9000 to a PC.
Applicable Literature
The I9000 Programmer’s Guide is part of the I9000 documentation. Honeywell
recommends the following to understand and use the I9000 System:
Intelliguard 9000 Specification Data, form 74-3035.
Intelliguard 9000 User’s Guide, form 74-3044.
Intelliguard 9000 Installation Instructions, form 74-3047.
Excel Security Manager (630) Specification Data, form 74-2875.
Conventions
This manual describes installation and use of the PRO9000 software.
Hardware and software components are described in italic text. For example, if you
see Place Disk 1 into drive A, it means take the floppy disk labeled Disk 1 and put it
into the computer drive A. This command assumes that the specific drive named
accepts that type of software. Honeywell recognizes this may not always be true.
For example, if the A drive is for a CD-ROM and the instructions require a floppy
drive, place the software in the drive designated for floppy disks. This could be B, C,
D or any other designated letter.
Instructions to type a specific command or press a specific key are written with the
command in bold. For example:
Type: Input means type the word Input and then press the Enter key.
A + between two commands means hold down the first key while pressing the other.
For example:
Ctrl+A means hold the control key down and press A.
Instructions to select something showing on the monitor are written Click Item. For
example:
Click Run means to place the cursor on the word Run, and click once with the left
mouse button. Double click means place the cursor on the selection and click twice
in rapid succession with the left mouse button.
All references to software mean the PRO9000 Software Program unless specifically
named something else.
INTRODUCTION
The Intelliguard 9000 (I9000) is an important part of the Excel Security Management
(XSM) System. The final step for setting up the I9000 is programming the system.
Honeywell recommends using a laptop or desktop computer with the PRO9000
software. This manual describes the steps in programming the I9000.
To Next Page
Loading...
