Home Automation
Rules
Editing or Deleting Rules
1.
At the Rules Programming Screen, select the Rule that you
wish to edit or delete.
Note: Rules 21-40 are only accessible through TotalConnect Service.
2. To edit the rule select the Edit button and proceed to step 3. To
delete the rule, select the Delete button and proceed to step 4.
3.
Select the field that you wish to edit and follow the steps as
outlined in the Programming Rules procedure.
4. Select the “” button or press the Home key to return to the
Automation programming or the Home screen.
- 17 -
To Next Page
Loading...
