Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis - Page 47

43
3. Scan the desired EAS timeout length (applicable for regular mode only).
The EAS timeout length specifies the maximum time that the area imager
will leave the EAS interlock signal asserted following a successful scan. The
EAS timeout setting has no effect in continuous mode.
Note: If the area imager routinely fails to deactivate EAS tags, increase the
value of the timeout setting.
EAS Timeout 100 ms
³ 8 4 6 0 0 0
EAS Timeout 500 ms
³ 8 4 6 0 5 0
EAS Timeout 1s
³ 8 4 6 0 1 0 0
EAS Timeout 5s
³ 8 4 6 0 5 0 0
To Disable EAS Support
Scan the bar code below to disable EAS support.
Disable EAS Support
³ 3 3 7 2 0 0