PolyGard
®
is a registered trademark of MSR GAMGC2-K_E_0320
Phone 0049(0)8531/9004-0 Fax: 0049(0)8531/9004-54 Specification subject to change without notice
MSR-Electronic GmbH, Bgm.-Schoenbauer-Str. 13, D 94060 Pocking www:msr-electronic.de Made in Germany
8 Menu Overview
Menu operation is done via a clear, intuitive and logical menu structure. The operating menu contains the
following levels:
• Starting menu with indication of the device type if no MP (Measuring Point) is registered. Otherwise
scrolling display of the gas concentrations of all registered sensors in 5-second intervals. If alarms are
active, only the values of the sensors currently in alarm status will be displayed.
• Main menu
• Submenu 1 to 3
Power On Time of the basic device
Second counter counts down, when communication between display <> basic
device is OK. In case of communication error, the count-down will stop.
Seconds indicator = 0
MGC2-K = Multi Gas Controller Kompakt
After about 5 seconds
“Warn-up Time” is displayed. As soon as the sensor warm-up period has
expired, the measured value is displayed = measuring mode.
Starting menu Main menu Submenu 1
Reading and acknowledgement of errors
See from point 8.1
Display of the alarm status of active alarms
See from point 8.2
Display of the relay status
See from point 8.3
Display of measuring values
See from point 8.4
General display parameters without safety relations
See from point 8.5
Reading and change of the relay, measuring point
and system parameters as well as test and calibration
functions
To Next Page
Loading...
