Honeywell MSR PolyGard 2 MGC2-K - Operating Data

User Manual - PolyGard
®
2
Multi-Gas-Controller MGC2-K Honeywell
Page 30
PolyGard
®
is a registered trademark of MSR GAMGC2-K_E_0320
Phone 0049(0)8531/9004-0 Fax: 0049(0)8531/9004-54 Specification subject to change without notice
MSR-Electronic GmbH, Bgm.-Schoenbauer-Str. 13, D 94060 Pocking www:msr-electronic.de Made in Germany
8.9 Operating Data
This menu is for retrieving relevant operational data of the sensor head and the basic unit. No changes or
modifications are possible.
Serial number of the device
Date of production of the device
Current days of operation
Display of the lowest temperature
detected at the device
Value is updated on new devices only after
a few days (initial value = 70°C)
Display of the highest temperature
detected at the device
Value is updated on new devices only after
a few days (initial value = -35°C)
Display of the zero offset of
analog output 1
(internal value)
Selection of analog input
The operating data for analog input
refer to the 4 – 20 mA signal!
Number of calibrations
performed
Current zero offset and gain
Serial Number
XXXX
Max. Temperature
31 °C
Operating Days
X Days
Date Manufacture
XX.XX.XX
Min. Temperature
25 °C
Analog Output 1
Offset 295
Analog Input ……X
Number of Calibr.
1
Zero Gain
xxxxx yyyyy
Operating Data