Honeywell Notifier ACPS-610/E - Page 43

ACPS-610/E Manual — P/N 53018:A1 07/31/2007 43
Synchronization Applications
Figure 4.6 Supervised Parallel Connection (Typical)
Up to 50
power
supplies
ELR
ACPS-610
ACPS-610
ACPS-610
ACPS-610
ACPS-610
ACPS-610
SLC
SLC
SLC
SLC
SLC
SLC
THIRD FLOOR
SECOND FLOOR
FIRST FLOOR
W
A
L
L
W
A
L
L
ELR
ELR
ELR
Output 4 Output 3 Output 2 Output 1
UZC
Input
Output 1
Output 2 Output 3
Output 4
UZC
Input
From
FACP
or last
device
on
SLC
To next
floor
Sync Riser
NOTE:
1. The NAC output devices from one power supply must be partitioned with walls and/or floors from the next
power supplies and their NAC output devices.
2. Use only devices from the same manufacturer in each system.
3. 50 ohm maximum loop resistance per sync riser. (Figure 4.6 shows one continuous sync riser.)
Output 4
Output 3 Output 2
Output 1
UZC
Input
Output 1
Output 2 Output 3
Output 4
UZC
Input
Output 4
Output 3 Output 2
Output 1
UZC
Input
Output 1
Output 2 Output 3
Output 4
UZC
Input
Up to 50
power
supplies
ACPS-610_parallel.cdr
Notification Zone
Notification Zone
Notification Zone
Notification Zone
Notification Zone
Notification Zone