Honeywell Notifier ID50 - Page 66

ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
62
997-263-000-11, Issue 11
January 2010
1
[Setup] Day mode activity = 08:00-> 18:00
> : Change 1 : Disable ¦ : More < : Exit
[Setup] Day mode activity = DISABLED
> : Change 1 : Disable ¦ : More < : Exit
[S1 Setup] 4: Peripheral Options
5: Day / Night Settings ¦ : More
[S1 Setup] 1: Panel Options
2: Site Details 3: Device Options ¦ : More
5 Press ‘
4
’ to save all changes and return to the Setup
menu screen.
To disable Day mode
1 With the Day mode activity menu displayed, press the
‘
1
’ button on the numeric keypad.
2 Press ‘
4
’ to exit and return to the Setup menu
screen.
5.5.5.2 Weekend Night Mode
If Weekend night mode is enabled, the panel disregards
the Day mode period on the two days of the week that
coincide with the weekend. To set this mode active:
1 From the Setup menu screen, using the numeric
keypad press the ‘
5
’ button to display the Day/Night
Settings screen.The Day Mode Activity screen is
displayed first.
2 Press the ‘
2
/
8
’ buttons to step through the Day/
Night Settings options until the Weekend night mode
screen is displayed.
3 Press the ‘
6
’ button to toggle this function.
4 Press ‘
4
’ to exit and return to the Setup menu
screen.
5
or
8 2
6
[Setup] Weekend night mode = Disable
> : Change ¦ : More < : Exit
[Setup] Weekend night mode = Enable
> : Change ¦ : More < : Exit
[Setup] Day mode activity = DISABLED
> : Change 1 : Disable ¦ : More < : Exit
[Setup] Day mode activity = DISABLED
Enter finish time : _0:00 < : Cancel
[Setup] Day mode activity = 08:00 -> 18:00
> : Change 1 : Disable ¦ : More < : Exit