Honeywell Notifier ID50 User Manual

ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
66
997-263-000-11, Issue 11
January 2010
[Setup] Delays Ind. = Active/Disable
> : Change ¦ : More < : Exit
[Setup] Delays Ind. = Active Only
> : Change ¦ : More < : Exit
6
or
82
3. Press the ‘
6
’ button to toggle this function.
4 Press ‘
4
’ to exit and return to the Setup menu
screen. The selection is saved on exiting.
5.5.5.7 Delays Indication
Select whether the DELAYS ACTIVE and
DISABLEMENTS LEDs are lit or the DELAYS ACTIVE
LED only is lit for active delays using this option.
1 From the Setup menu screen, press the ‘
5
’ button
on the numeric keypad to enter the Day/Night Settings
menu. The Day mode activity screen is displayed first.
2 Press the ‘
2
/
8
’ buttons to step through the Day/
Night Settings options until the Delays Ind. screen is
displayed.
3 Press the ‘
6
’ button to toggle this function.
4 Press ‘
4
’ to exit and return to the Setup menu
screen. The selection is saved on exiting.
[Setup] Day Mode 2 Zone Ends Delay = Yes
> : Change ¦ : More < : Exit
6
[S1 Setup] 4: Peripheral Options
5: Day / Night Settings ¦ : More
[S1 Setup] 1: Panel Options
2: Site Details 3: Device Options ¦ : More
5
[Setup] Day mode activity = DISABLED
> : Change 1 : Disable ¦ : More < : Exit

Honeywell Notifier ID50 Specifications

General

Brand	Honeywell
Model	Notifier ID50
Category	Control Panel
Language	English