4. Product Specification
4.4. XYR 6000 Transmitter User Environment
12 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide Revision 3
September 2012
Table 4-3 Specifications of DSSS Radio Module in XYR 6000 Transmitter for KOC
Applications
4.4 XYR 6000 Transmitter User Environment
Table 4-4 User Environment Specifications for XYR 6000 Transmitter
Item Specification
Operating Temperature: –40ºC to +85ºC (–40°F to +185°F)
Storage Temperature: –40ºC to +85ºC (–40°F to +185°F)
Operating Humidity: 0 to 100% RH
Other Environmental specifications and information may be found in the appropriate Instrument
Specification available on the Honeywell website. www.honeywellprocess.com
4.5 XYR 6000 Instrument Power Specifications
The XYR 6000 Transmitters operate from two (2) D-size 3.6V Lithium Thionyl Chloride (Li/SOCl2)
batteries. These are joined in series to produce a maximum voltage of +7.6 Vdc. An optional external +24
Volt power supply option is also available.
4.6 Weight
Most non-pressure sensing versions of the XYR 6000 transmitter have a maximum weight of 7.0 lbs (3.2
kg). Pressure transmitter versions can weigh from 7.0 lbs (3.2 kg) to 35 lbs (15.9 kg) for a flange equipped
model. These weights do not include remote cables or antennas. Add 8.0 lbs (3.6 kg) to any transmitter
equipped with the stainless steel housing option (A3 or SH option).
Item Specification
Wireless Standard FCC 15.247 / IEEE 802.15.4 Direct Sequence Spread Spectrum
(DSSS), 2.4 GHz
Data Rates and Modulation Data Rate: 250 kbps
Modulation: Offset Quadrature Phase-Shift Keying (OQPSK – DSSS)
Frequency Band 2,485 – 2,495 MHz
Module Transmit Power
Maximum: 20 dBm
(Maximum transmit power will vary by channel)
Receive Sensitivity (typical) -100 dBm
To Next Page
Loading...
