Honeywell Pallet Accuglide ZoneFlex Accumulation Conveyor - Troubleshooting Help

Pallet Accuglide ZoneFlex Accumulation Conveyor | Maintenance Manual | 29334206 97
February 14, 2018
Troubleshooting
Symptom
Probable Cause
Corrective Action
Product loads not
accumulating or releasing
as intended
Dip switches on valve
module not set correctly.
Set middle switch in the
direction of product travel.
Set outer switches to the
"2" position.
6.4 Troubleshooting Help
If you need further assistance, please visit www.intelligrated.com or call our
Technical Support Department at 1-877-315-3400.