Honeywell Pallet Accuglide ZoneFlex Accumulation Conveyor - Page 22

16 Pallet Accuglide ZoneFlex Accumulation Conveyor | Maintenance Manual | 29334206
February 14, 2018
General Description
Control Voltage
• 110VAC or 24VDC for discharge solenoid valve and optional
solenoid operated oiler.
• 24VDC for ZoneFlex control valve.
Accumulation Zone
Activation
Retro-reflective sensors (24V) with ZoneFlex control valve
modules.
Elevation Range
18 inches to 48 inches top of roller.
Operating
Environment
+40° to +104° F (+4° to +40° C)
Power
Requirements
• Clean, electric power of 230 or 460 volts, 3 Phase, 60 Hz is
required for motors.
• Control power is 24VDC or 110VAC, single phase, 60 Hz.
• 24VDC power required for ZoneFlex zone control valves
(requires 110 - 230VAC input for standard power supply).
Supports
Heavy-duty 7 gage formed channel with gussets.
Accessories and
Options
• Advance Rollers
• Air Supply Panel
• Cable - Parallel T-Cable
• Cable - Power Extension - optional
• Cable - Photo-Eye Extension - optional
• Cable - Photo-Eye Signal Splitter - optional
• Cable - Power Isolator - optional
• Chain, RC50 with Extended Pin
• Drip Pan Assembly - optional
• Driver Pad with/Wear Indicator
• Fixed End Stop - Angle - optional
• Fixed End Stop - Channel - optional
• Photo-Eye Bracket / Reflector Mount - optional
• Power Supply Panel
• Support Legs
• Wheel Side Guides - optional
Finish
Powder coated paint.