7
or
IPC Computer
Network Cable Network Cable
Internet
3. Go to the router’s management interface through IE browser to forward the IP address and port of the camera in the “Virtual
Server”.
Router Setup
4. Open the IE browser and input its WAN IP and http port to access.
Access through static IP
Network connection
The setup steps are as follow:
1. Go to Config > Network > Port menu to set the port number.
2. Go to Config > Network > TCP/IP menu to set the IP address. Check “Use the following IP address” and then enter the static IP
address and other parameters.
3. Open the IE browser and enter its WAN IP and http port to access.
Performance Lite 2MP SD Camera - User Manual | Network Connection
To Next Page
Loading...
