21
1. Check “Enable”.
2. Check the IP address and auto report port of the transfer media server in the ECMS/NVMS. Then enable the auto report in the
ECMS/NVMS when adding a new device. Next, input the remaining information of the device in the ECMS/NVMS. After that, the
system will auto allot a device ID. Please check it in the ECMS/NVMS.
3. Input the above-mentioned server address, server port and device ID in the responding boxes. Click “Save” button to save the
settings.
DDNS Configuration
If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to Config > Network > DDNS.
Server Configuration
This function is mainly used for connecting network video management system.
Performance Lite 2MP SD Camera - User Manual | Configuration
To Next Page
Loading...
