Honeywell PERFORMANCE LITE 2MP SD User Manual

28
Security Configuration
User Configuration
Go to Config > Security.
Add user:
1. Click “Add” button to pop up the following textbox.
2. Enter user name in “User Name” textbox.
3. Enter letters or numbers in “Password” and “Confirm Password” textbox.
4. Choose the user type. Administrator has all permissions. Normal user can only view the live video. Advanced user has the
same permissions as an Administrator except for; user, backup settings, factory reset, and upgrading the firmware.
5. Enter the MAC address of the PC in “Bind MAC” textbox.
If this option is enabled, only the PC with the specified MAC address can access the camera for that user.
6. Click the “OK” button and then the newly added user will be displayed in the user list.
Modify user:
1. Select a user to modify password and MAC address if necessary in the user configuration list box.
2. The “Edit user” dialog box pops up by clicking the “Modify” button.
Performance Lite 2MP SD Camera - User Manual | Configuration

Honeywell PERFORMANCE LITE 2MP SD Specifications

General

Brand	Honeywell
Model	PERFORMANCE LITE 2MP SD
Category	Digital Camera
Language	English