Honeywell PX45 - Page 109

PX45 and PX65 High Performance Printer User Guide 99
Power Mode Selects the power management setting for the radio.
Constant Awake provides the highest throughput, but
draws the most power. Power Saving conserves the most
power, but provides the lowest throughput.
Constant
Awake
Channel Sets the common channel that radios in Ad Hoc mode
use to transfer data
1
Hidden SSID Determines if the radio is allowed to look for SSIDs that
have been hidden to prevent unauthorized devices from
connecting to the wireless network.
Disable
Security
Security Type Selects the protocol that the radio uses to verify its
identity and makes sure that it is authorized to
communicate on the wireless network.
Pre-Shared Key
Association Selects the security method that the radio uses to get
access to the wireless network.
Open/WEP
Pre-Shared Key Defines the passphrase that allows the radio to
authenticate over the wireless network (for both WPA and
WPA2 security). Range is 8 to 64 characters.
Network Key Index Selects the active network key to use for WEP security.
Range is 1 to 4.
1
Network Key 1- 4 Defines a network key that is used for WEP security.Keys
are entered in ASCII or hexadecimal (preceded by 0x)
format.
User Name Sets the name that the printer uses when logging in to
the network. Range is 1 to 96 characters.
Password Sets the password that the printer uses when logging in
to the network. Range is 1 to 96 characters.
Anonymous Name Sets the outer EAP user name that the printer uses for
logging in to the network. Maximum length is 96
characters.
Inner Authentication Selects the authentication method that is uses when the
EAP type is EAP-FAST, PEAP, or TTLS
MSCHAPv2
CA Certificate Sets the name of the Certificate Authority (CA) that
verifies the server certificate. This CA should be the same
one that was used to sign the server certificate.
honeywell.pem
Client Certificate Sets the name of the client certificate the printer uses to
authenticate to the network using EAP-TLS. Maximum
length is 128 characters.
Client Key Sets the private key the printer uses for EAP-TLS.
Maximum length is 128 characters. Use the certinstallsh
script to install the certificate correctly.
Server Common
Name 1 - 2
Sets the certificate name that is on the primary
authentication server. If this value is none, then the value
for Server Common Name 2 is used. Range is 1 to 96
characters.
802.11 Wireless
Setting
Description Default