Honeywell PX45 - Uploading from the Web Page; Uploading from a USB Storage Device

60 PX45 and PX65 High Performance Printer User Guide
If your printer uses the Fingerprint programming language, use the SETUP
command followed by the node, subnode, and parameter setting. For example, this
changes your media setting to labels with gaps:
SETUP “Printing,Media,Media Type,Media With Gaps”
To retrieve the list of available settings for “Printing,Media” you can use the
following command.
SETUP WRITE “Printing,Media”,“stdout”
To get a full list of the available settings in Fingerprint language onto the terminal
program, you can use the following command:
SETUP WRITE “All”,“stdout”
For more information on how to change configuration settings with a
programming language, refer to the respective printer command language
reference manual.
Uploading from the Web Page
You can use the printer web page to install fonts, images, applications, formats,
and web forms to the printer.
1. Open a web browser on your PC.
2. In the address bar, type the IP address of your printer and press Enter. The
printer web page appears.
3. Click Login. The Login page appears.
4. Type your Username and Password and then click Login. The default value for
Username is itadmin and the default value for Password is pass.
5. Click the Manage tab. The Overview page appears.
6. Click on the desired item in the Overview list. The upload page appears for the
option you selected.
7. To upload a file to the printer, click Browse to locate your file. Double-click the
file to select it, then click Upload. The file uploads to the printer.
8. Click Save when you are finished.
Uploading from a USB Storage Device
You can use a USB storage device to install fonts, images, applications, formats,
and web forms to the printer. Use this table to understand where your files need to
be located on the USB storage device for the printer to install them.