PX45 and PX65 High Performance Printer User Guide 11
SET UP THE PRINTER
About the Media
The PX45 and PX65 can print on labels, tickets, tags, and continuous stock in vari-
ous forms. The method you use to load media depends on how you want the printer
to operate. The PX45 and PX65 can print in these modes:
•Tear-off (straight-through)
• Peel-off (self-strip)
• Cut-off
• Batch take-up
• External supply
•RFID
Loading Media for Tear-Off Printing
In tear-off, or straight-through, printing mode, you manually tear off the media
against the printer’s tear bar. In tear-off mode, use these types of media:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps (gap stock), with or without perforations
• Tickets with black marks (mark stock), with or without perforations
You can also install an optional label taken sensor so that the next copy in the
batch is not printed until the current copy is removed.
To Next Page
Loading...
