2 PX45 and PX65 High Performance Printer User Guide
Print/Feed Button
Use the Print/Feed button to feed media, pause print jobs, and print.
About the Ready-to-Work Indicator
The Ready-to-Work indicator turns on when the printer is ready to print.
About the Navigation Buttons
Use the navigation buttons to move through the screen.
Printer State Print/Feed Button Action
Startup Press the Print/Feed button during startup to enter Calibration mode or to
restore defaults if the printhead is lifted.
Ready Press the Print/Feed button to advance the media.
If the print key feature is on, press the Print/Feed button to reprint the last
job.
Press and hold the Print/Feed button to calibrate the media sensors.
Printing Press the Print/Feed button to stop or pause printing. The printer stops
after completing the current label.
Paused Press the Print/Feed button to resume printing.
Error Press the Print/Feed button to advance the media.
Status Description
On Printer is ready for a print job.
Blinking Printer is not ready for a print job.
Off Printer is turned off, not communicating, or not ready to print. For example,
the printer may still be starting up, or a firmware upgrade is underway.
Button Description
Menu/Home button. Toggles between the Ready screen and the Main
Menu. If you created menu shortcuts, the Main Menu is replaced by the
Quick Choices menu. The Main Menu appears as the first item in the Quick
Choices list.
Directional pad. Use the arrow buttons to highlight an item on the screen.
Press the Enter button to select the highlighted item or save settings
in a menu or list.
Back button. Returns to the previous menu or page, or stops a running
Fingerprint application.
To Next Page
Loading...
