100 PX45 and PX65 High Performance Printer User Guide
Printing
Media
To view these settings:
• From the printer Main Menu, select Settings > Printing > Media.
• From the printer web page, click Configure > Printing > Media.
Validate Certificate Determines if the identity of the authentication server is
verified using its certificate when using EAP-TTLS, PEAP,
or EAP-TLS. Honeywell recommends that you set
Validate Certificate to Yes.
No
PAC Sets the name of the PAC (Protected Access Credential)
file that is used for EAP-FAST authentication. The printer
uses this file if Acquire PAC is ON and the current
installed PAC fails to authenticate the printer to the
network.
eap-fast.pc
Acquire PAC Determines if automatic PAC file provisioning is on for
EAP-FAST authentication.
On
Fast Roaming
(CCKM)
Determines if the printer can roam from one access point
to another without reauthenticating with the server.
CCKM works in wireless networks using LEAP.
Disable
Network
(IPv4) IP Assignment
Method
Specifies how the printer obtains an IP address. DHCP
(IPv4) IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
0.0.0.0
Subnet Mask Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network (IPv4).
0.0.0.0
Default Router Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
0.0.0.0
DHCP Response Specifies if the printer receives DHCP responses by
broadcast or unicast.
Broadcast
(IPv6) IP Assignment
Method
Specifies how the printer obtains an IP address (for IPv6
networks).
Automatic
(IPv6) IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
802.11 Wireless
Setting
Description Default
Media Setting Description Default
Media Type Selects the type of media that is loaded in the printer. Media With Gaps
To Next Page
Loading...
