8 PX45 and PX65 High Performance Printer User Guide
Set the Command Language from the Main Menu
You can use the Settings option from the Main Menu to change the printer
command language.
1. From the Main Menu select Settings > System Settings > General.
2. Press to scroll down to Command Language.
3. Press or to select a different command language.
4. Press to save your changes.
5. Turn the printer off and then on. The printer starts up in the command
language you selected.
Set the Command Language from the Printer Webpage
To set the command language from the printer webpage, you need to turn on the
printer and connect to your Ethernet network.
1. Make sure that the printer has media and ribbon (if necessary) installed.
2. On your PC, open a Web browser.
3. In the Location or Address bar, type the printer IP address and press Enter. The
printer webpage appears.
4. Click Login.
5. Type your Username and Password and click Login. the default username is
itadmin and the default password is pass.
6. Click the Configure tab.
7. Click System Settings > General.
8. Select a different printer command language from the Command Language
list, and then click Save.
9. Click the Services tab.
10. Click Reboot Printer, and then click Reboot. The printer restarts in the
command language you selected.
To Next Page
Loading...
