Honeywell PX45 - Error; Warning

108 PX45 and PX65 High Performance Printer User Guide
Error
To view these settings:
• From the printer Main Menu, select Printer Settings > Alerts > Error.
• From the printer web page, click Configure > Alerts > Error.
Warning
To view these settings:
• From the printer Main Menu, select Settings > Alerts > Warning.
• From the printer web page, click Configure > Alerts > Warning.
Delay Unit Selects the unit of measure that determines how often the alert is sent out.
Message Sets the message that is sent out with alert for a specific printer event.
Alert Description
Errors Alerts
Default Values
Status
Delay Repeat Delay Unit Message
Next Label Not found Disable 1 Occurrences Error-Next label not found
Out of Media Enable 1 Occurrences Error-Out of media
Out of Ribbon Enable 1 Occurrences Error-Out of ribbon
Printer in Pause
Mode
Disable 1 Occurrences Error-Printer in pause mode
Printer in Menu Mode Disable 1 Occurrences Error-Printer in menu mode
Application Break Disable 1 Occurrences Error-Application break
RFID not installed Disable 1 Occurrences Error-RFID not installed
No RFID Tag found Disable 1 Occurrences Error-No RFID tag found
Printhead Lifted Enable 1 Occurrences Error-Printhead lifted
Printhead Not
Detected
Disable 1 Occurrences Error-Printhead not
detected
Printhead Too Hot Disable 1 Occurrences Error-Printhead too hot
Motor Too Hot Disable 1 Occurrences Error-Motor too hot
Power Supply Too
Hot
Disable 1 Occurrences Error-Power supply too hot
Memory Full Disable 1 Occurrences Error-Memory Full
Flash Memory Full Disable 1 Occurrences Error-Flash Memory Full
Warning Alerts
Default Values
Status
Delay Repeat Delay Unit Message
Ribbon installed Disable 1 Occurrences Warning-Ribbon installed
Media Low Enable 1 Occurrences Warning-Media Low