Honeywell PX45 - Page 55

PX45 and PX65 High Performance Printer User Guide 45
5. Adjust the ribbon supply bobbin for your ribbon.
• If your ribbon is 55 to 60 mm (2.16 to 2.3 in) wide, compress the ribbon
supply bobbin and move it so it snaps into the first (innermost) groove.
• If your ribbon is 88 to 90 mm (3.5 in) wide, compress the ribbon supply
bobbin and move it so it snaps into the second groove.
• If your ribbon is 110 mm (4.3 in) wide, compress the ribbon supply bobbin
and move it so it snaps into the third (outermost) groove.
55-60 mm
(2.1-2.3”)
80- 90 mm
(3.5”)