Revision 2 RMA803 Remote Indicator User's Guide 1
Introduction
1.1 About the RMA801 Remote Indicator
The RMA801 Remote Indicator provides a means of remote-mounting a meter (display) that is
associated with a Honeywell Smartline Transmitter or any transmitter operating in a 4-20 mA current
loop.
The RMA801 is a DE/Analog Remote Indicator which can be connected anywhere along the current
loop, providing easy access to data from devices that are mounted in inaccessible locations.
For analog PV, the RMA801 measures the loop current and displays the equivalent PV value on the
display.
The RMA801 will autoconfigure when connected to Honeywell STT700/STT250 DE transmitters when
a database upload is performed.
The RMA801 - Remote Indicator can be used in hazardous environments or in ordinary
environments. When used in hazardous environments, the remote housing must be configured as per
local installation codes.
The display module fitting allows for rotation in 90 degree increments, allowing the RMA801 to be
mounted in various orientations.
1.2 Features and Options
Table 1: Feature and Options
Feature/Option Standard/Available Options
Communication Protocols Analog (4-20 mA), Honeywell DE (STT250/STT700)
PV Display
• Display mA or percent value for any analog (4-20 mA)
transmitters
• Temperature and Pressure units support.
Device Configuration
• Manual - using display buttons
• Autoconfiguration for DE devices (STT250/STT700)
Human-Machine Interface
(HMI)
Standard Display:
• 0, 90, 180 & 270 degree viewing position adjustments
• Two-mode operations: PV display and Menu Navigation
Display language: English only
Device Diagnostics
Approvals
ATEX, CSA, FM, IECx.
Refer to Appendix A for details.
Mounting Brackets Pipe mounting and wall mounting brackets in carbon steel and 316
stainless steel.
Firmware Upgrade SAT tool for firmware upgrade
To Next Page
Loading...
