Honeywell RMA801 - Figure 6: Mounting Bracket Secured to a Remote Indicator; Figure 7: Pipe Mounting Bracket Secured to a Horizontal or Vertical Pipe

Revision 2 RMA803 Remote Indicator User's Guide 8
Figure 6: Mounting Bracket Secured to a Remote indicator
3. Position the bracket on a 2-inch (50.8 mm) horizontal or vertical pipe, and install a “U” bolt
around the pipe and through the holes in the bracket. Secure the bracket with (2) M10 hex nuts,
(2) flat washers and (2) lock washers provided. Refer Figure 7.
Figure 7: Pipe Mounting Bracket Secured to a Horizontal or Vertical Pipe