Honeywell ST 800 - 3.4 Mounting ST 800 SmartLine Pressure Transmitters; 3.4.2 Mounting Dimensions

SmartLine Pressure Transmitter
18 Quick Start Installation Guide December 2016
Figure 12: Jumper Location HART/DE
Table 3 - Jumper Settings
Jumper
Settings
Description
Failsafe = UP (High)
Write Protect = OFF (Not Protected)
Failsafe = DOWN (Low)
Write Protect = OFF (Not Protected)
Failsafe = UP (High)
Write Protect = ON (Protected)
Failsafe = DOWN (Low)
Write Protect = ON (Protected)