VisionPRO TM 8000 Touchscreen Programmable Thermostat
INSTALLERSETUP
Follow these steps to enter the installer Setup:
1. Press and release the System Key.
3,
Release the two blank keys when the screen on the
thermostat matches the screen below.
2.
/i Hu 1
M22426A
Press and hold the two blank keys on either side of the
center blank key for approximately five seconds until
screen changes.
M19923
4. See screen below to review how the thermostat keys
are used during Installer Setup. See Tables 3-5 for the
installer Setup Numbers and Settings.
F- ADVANCE TO NEXT
sNESuT_pLLER _ /INST#rLLLcEuRRSETUTP
iNSTALLER SETUP CURRENT
SETTING M22443
5. Press the Done key to exit the installer Setup screen.
15 68-0280
To Next Page
Loading...
