VisionPRO TM 8000 Touchscreen Programmable Thermostat
Table 5. User Setup Settings.
User
Setup User Setup
Number Name Settings
0500 Furnace air filter
O--off (factory setting)
1--10 fan run time days
(about one month)
2--30 fan run time days
(about three months)
3--60 fan run time days
(about six months)
4--90 fan run time days
(about nine months)
5--120 fan run time days
(about one year)
6--365 fan run time days
(about three years)
0510 Humidifier pad 0--off
reminder 1--3 months
2--6 months
3--12 months
0520 UV lamp reminder 0--off (factory setting)
1--1 year
0540 Number of 2--two (Wake and Sleep)
schedule periods 4--four (Wake, Leave,
available Return, Sleep)--factory
setting
0640 Clock format 12--12-hour clock
(factory setting)
24--24-hour clock
0670 Screen lockout
0--all keys available;
screen is unlocked
(factory setting)
1--screen is partially
locked. All key functions
locked except Temper-
ature Up and Down keys
and Cancel key.
2--screen is fully locked
PROGRAMMING
PreprogrammedEnergy Star Settings
Table 6 shows default program settings. Visit the Energy Star
web site at www.enerqystar.qov for additional education and
resources on programmable thermostats.
Table 6. Energy Star Default Program Settings.
Schedule Fan
Period Time Setting
Wake 6:00AM Auto
Leave 8:00AM Auto
Return 6:00PM Auto
Sleep 10:00PM Auto
Setpoints
Heat Cool
70°F 78°F
(21 °C) (25.5°C)
62°F 85°F
(16.5°C) (29.5°C)
70°F 78°F
(21 °C) (25.5°C)
62°F 82°F
(16.5°C) (28°C)
ProgramHeating and Cooling Schedule
Your thermostat can control up to four different schedule
periods per day:
Wake--Period when you awaken and want your home at a
comfortable temperature.
Leave--Period when you are away from home and want an
energy-saving temperature.
Return--Period when you return home and want your home
back to a comfortable temperature.
Sleep--Period when you are asleep and want an energy-
saving temperature.
NOTE: Schedule times are in 15-minute intervals.
23 68-0280
To Next Page
Loading...
