Honeywell VisionPRO 8000 - Make Changes to Installer Setup

VISIONPRO
®
8000 WITH WI-FI
®
33-00096—01 10
Thermostat Password (Date Code)
Fig. 18. Locate password.
The following options are available when you access Installer
Options. For more information on each, press Help on the
thermostat or see Table 1.
Fig. 19.
Make Changes to Installer Setup
1. Touch Menu.
2. Select Installer Options.
Fig. 20.
3. Enter password (date code) and touch Done. See “Find-
ing Your Password (Date Code) to Access Installer
Options” beginning on page 9 for more information.
Fig. 21.
4. Select Installer Setup.
Fig. 22.
5. Follow prompts on the screen to select the desired setup
options. See Table 2 for Installer Setup options.
1-855-733-5465 yourhome.honeywell.com Honeywell Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321WF1001
1
1524
M35343A
Residential/Résidentiel 1-800-468-1502 http://yourhome.honeywell.com Commercial/Commerciale 1-888-245-1051 http://customer.honeywell.com Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321WF1001
1
1524
M35344
Password
(Date Code)
Scroll to see:
Installer Setup
Installer Test
Reset To Defaults
Device Info
Table 1. Installer Options.
Menu Item Description
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly. Minimum
off timers are ignored during the test.
Reset To
Defaults
Select RESET TO DEFAULTS to place all
thermostat settings back to the factory
settings.
Device Info For Honeywell use only.
MCR33976
Installer Options
MCR33977
Enter password
0 0 0 0
MCR34015
Installer Setup
Installer Test