Honeywell VisionPRO 8000 - Connect to Wi-Fi Network

VISIONPRO
®
8000 WITH WI-FI
®
37 33-00096—01
Connect to Wi-Fi
®
Network
1. Touch MENU
2. Select Wi-Fi Setup.
The thermostat will scan for available Wi-Fi networks.
3. The screen displays “Finding Networks Please Wait”
after which it displays a list of all Wi-Fi networks it can
find.
4. Find the name of the network you want to use by
pressing the arrow buttons to scroll up/down or left/right.
Press the Wi-Fi network name, then press Select.
NOTE: If the Wi-Fi network name is hidden, see
“Connecting to a hidden Wi-Fi network” on
page 38.
5. When prompted, press the screen to edit the password
(if necessary).
6. Enter the password.
Press the  or  buttons to change the letter or
number. Press the button to move to the next
character, or the button to move to the previous
character. Use the  or  buttons at the bottom to
change letter case. Press Done when complete.
7. The screen will let you know when the connection is
successful.
Press Done when the connection is successful.
If the connection is not successful, the screen will explain
why not. See “Unsuccessful connection” on page 38.
Follow instructions on the screen to try again.
NOTE: Press the  for more information about an
unsuccessful connection.
8. If you want remote access to the thermostat, you must
set up an account at mytotalconnectcomfort.com and
add the thermostat to the account.
NOTE: You will need the thermostat MAC and CRC IDs to
add the thermostat. They are on the screen under
Menu, Wi-Fi Setup and on the Thermostat ID Card
packed with the thermostat.


DoaIol Inrol Madorl
Wi-Fi Setup
Installer Options
M35352
M35349
Finding Networks
Please Wait
M35347
Select Wi-Fi Network
Your Network
M35350
Enter Password
Press Here to Edit
M35346
Delete Space
AC
M35360
M35351
Connection
Successful
M35361A
Register at:
Honeywell.com/TCC