Honeywell VOYAGER 1250G - Page 210

9 - 38
MSI Check Character *Validate Type 10,
but Don’t Transmit
MSICHK0 6-59
Validate Type 10 and
Trans mit
MSICHK1 6-59
Validate 2 Type 10
Chars, but Don’t
Trans mit
MSICHK2 6-59
Validate 2 Type 10
Chars and Transmit
MSICHK3 6-59
Validate Type 10
then Type 11 Char,
but Don’t Transmit
MSICHK4 6-59
Validate Type 10
then Type 11 Char
and Transmit
MSICHK5 6-59
Disable MSI Check
Characters
MSICHK6 6-59
MSI Redundancy Range (0 - 10) *0 MSIVOT## 6-59
MSI Message Length Minimum (1 - 80) *3 MSIMIN## 6-60
Maximum (1 - 80)
*80
MSIMAX## 6-60
Plessey Code Default All
Plessey Code
Settings
PLSDFT 6-60
Off PLSENA0 6-60
*On PLSENA1 6-60
Plessey Check Char. *No Check Char. PLSCHK0 6-61
Validate, But Don’t
Trans mit
PLSCHK1 6-61
Validate,
and Transmit
PLSCHK2 6-61
Plessey Redundancy Range (0 - 10) *0 PLSVOT## 6-61
Plessey Message
Length
Minimum (1 - 80) *3 PLSMIN## 6-61
Maximum (1 - 80)
*80
PLSMAX## 6-61
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page