horsch SPRINTER 11 NT - Technical Data

Technical data
Sprinter 11 NT 15 NT
Working width (m) 10.80 15.00
Transport width (m) 6.60 6.60
Transport height (m) 3.70 5.55
Length without SW (m) 6.70 6.70
Length with SW 12000 SD (m) 12.35 12.35
Weight without SW (kg) *) 7,650 8,800
Weight with SW 12000 SD (kg) *) 12,350 13,500
Groove spacing (cm) 30 25 / 30
Number of coulters / coulter rows 36 / 3 60 / 50 / 3
Ø rollers (cm) 40 40
Coulter pressure rollers (kg) 5-120 5-120
Wheels undercarriage and support wheels 400/60-15.5
Load index 140 A8
400/60-15.5
Load index 140 A8
Working speed (km/h) 7-10 7-10
Required power (kW/PS) 210-235 / 285-320 260-295 / 350-400
Double acting control units 3 3
Pressureless return 󰘱ow (max. 5 bar) 1 1
max. system pressure hydraulics (bar) 210 210
Oil quantity hydr. fan (l/min) 40-50 40-50
Type-relate max. speed (road transport) Speci󰘰cation in operating permit
NOTE:
• Deviations due to technical further development reserved.
• *) The weight of the hitched implement depends on the equipment; speci󰘰cation with minimum equipment
• The permissible transport heights and transport width for transport on public roads may di󰘯er from country to country.
Comply with the national registration regulations.
18