horsch SPRINTER 11 NT - Distributor; Hose Installation

MF 37
Distributor
Depending on the working width, the distributors
are 󰘰tted with a di󰘯erent number of seed and
fertiliser hoses.
Maintenance and inspections
¾ Check the distributor regularly for foreign
objects or blockage. Unscrew the distributor
cover and check the outlets.
¾ Check all components regularly for leak tightness.
¾ Check the correct order of the seed 󰘱ow sensors.
Seed ow control (option)
The seed hoses can be monitored with the seed
󰘱ow sensors.
The sensors are connected in series and the
numbers inform about the order.
In cases of an alarm, these sensor numbers help
when troubleshooting the hoses.
Hose installation
The outlets on the seed boxes are allocated to
the individual coulters through numbering.
NOTE
Uniform seed placement can only be ensured
when the seed transport to the coulters is working.
¾ Observe correct hose installation.
NOTE
¾ Outlets can be closed for double groove spac-
ing when drilling maize.
To this end, close all even-numbered (with
rectangular frame) or odd-numbered (with
round frame) outlets with the dummy plugs.
¾ Close the outlets tightly to prevent loss of air.
¾ Adjust the seed quantity in the E-Manager and
verify before drilling.
Dummy plugs to close outlets