horsch SPRINTER 11 NT - Use in the Field

Use in the eld
¾ Unfold the machine completely, see Unfolding.
¾ Activate the fan.
¾ Check the pre-load pressure on the pressure
gauge, see chapter Hydraulics.
¾ Refer to the instructions for the E-Manager
for the settings for sowing.
¾ Set the lever for 󰘰eld or road travel again to
Road after completing the 󰘰eld work.
Position
Control unit
Floating position Locked position Supply
Folding
ed Nov 06
DatumEn tw.DateinameZeichnungsnummerMaschine Zeichnung
Aufkleber
00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
Lift/lower
ed Nov 06
DatumEn tw.DateinameZeichnungsnummerMaschine Zeichnung
Aufkleber
00110681 - 7
00110681 00110682
00110683 00110684
00110685 00110686
00110687
Fan
Position of control units during use in the eld
35