HP 1040 SERIES User Manual

CARE AND
MAINTENANCE
CARE AND
MAINTENANCE
CARE AND
MAINTENANCE
CARE AND
MAINTENANCE
CARE AND
MAINTENANCE
CARE AND
MAINTENANCE
CARE AND
MAINTENANCE
Care and maintenance 61
Clean the document scanner area
Clean the document scanner area
To keep your machine working properly, occasionally clean the white roller, document
feeder rubber piece, and the scanning glass. If they are dirty, documents sent to another
fax machine will not be clear.
CAUTION: When you turn the power off to clean the scanner, documents stored in
memory will be lost.
1. Open the control panel.
2. Remove the white roller.
a. At the right-hand end of the white roller there is a bushing that is secured with a
small tab.
b. Push the tab slightly inward, then rotate towards you. Then pull up the right-hand
end of the roller to remove it.
3. Wipe the white roller surface and the driver roller surface with a soft cloth dampened
with water.
1 White roller
2 Drive roller
3 White roller latch
3
21

HP 1040 SERIES Specifications

General

Brand	HP
Model	1040 SERIES
Category	Fax Machine
Language	English