HP 10500 series

139
[SwitchA-mpls] mpls te
[SwitchA-mpls] mpls rsvp-te
[SwitchA-mpls] mpls rsvp-te hello
[SwitchA-mpls] interface vlan-interface 1
[SwitchA-Vlan-interface1] mpls
[SwitchA-Vlan-interface1] mpls te
[SwitchA-Vlan-interface1] mpls rsvp-te
[SwitchA-Vlan-interface1] mpls rsvp-te hello
[SwitchA-Vlan-interface1] quit
# Configure Switch B.
<SwitchB> system-view
[SwitchB] mpls lsr-id 2.2.2.9
[SwitchB] mpls
[SwitchB-mpls] mpls te
[SwitchB-mpls] mpls rsvp-te
[SwitchB-mpls] mpls rsvp-te hello
[SwitchB-mpls] interface vlan-interface 1
[SwitchB-Vlan-interface1] mpls
[SwitchB-Vlan-interface1] mpls te
[SwitchB-Vlan-interface1] mpls rsvp-te
[SwitchB-Vlan-interface1] mpls rsvp-te hello
[SwitchB-Vlan-interface1] quit
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] mpls
[SwitchB-Vlan-interface2] mpls te
[SwitchB-Vlan-interface2] mpls rsvp-te
[SwitchB-Vlan-interface2] mpls rsvp-te hello
[SwitchB-Vlan-interface2] quit
# Configure Switch C.
<SwitchC> system-view
[SwitchC] mpls lsr-id 3.3.3.9
[SwitchC] mpls
[SwitchC-mpls] mpls te
[SwitchC-mpls] mpls rsvp-te
[SwitchC-mpls] mpls rsvp-te hello
[SwitchC-mpls] quit
[SwitchC] interface vlan-interface 2
[SwitchC-Vlan-interface2] mpls
[SwitchC-Vlan-interface2] mpls te
[SwitchC-Vlan-interface2] mpls rsvp-te
[SwitchC-Vlan-interface2] mpls rsvp-te hello
[SwitchC-Vlan-interface2] quit
4. Configure IS-IS TE. (Details not shown.)
5. Configure the MPLS TE tunnel. (Details not shown.)
6. Configure RSVP-TE GR:
# Configure Switch A.
<SwitchA> system-view