HP 10500 series

Resetting IPv6 BGP connections
When BGP configuration changes, you can use the soft reset function or reset BGP connections to make
new configurations take effect. Soft reset requires that BGP peers have route refreshment capability
(supporting Route-Refresh messages).
To hard reset or soft reset BGP connections:
Task Command Remarks
Soft reset the IPv6 BGP connections
in a VPN instance.
refresh bgp ipv6 vpn-instance
vpn-instance-name { ipv6-address
| all | external } { export | import }
Available in user view.
Hard reset the IPv6 BGP
connections of a VPN instance.
reset bgp ipv6 vpn-instance
vpn-instance-name { as-number |
ipv6-address | all | external }
Available in user view.
Displaying information about IPv6 MCE
Task Command Remarks
Display information about a
specific or all VPN instances.
display ip vpn-instance [ instance-name
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about the IPv6
FIB of a VPN instance.
display ipv6 fib vpn-instance
vpn-instance-name [ acl6 acl6-number |
ipv6-prefix ipv6-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display a VPN instance's FIB
entries that match the specified
destination IPv6 address.
display ipv6 fib vpn-instance
vpn-instance-name ipv6-address
[ prefix-length ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about IPv6
BGP peers established between the
PE and CE in a VPN instance.
display bgp vpnv6 vpn-instance
vpn-instance-name peer [ ipv6-address
verbose | verbose ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the BGP VPNv6 routing
information of a VPN instance.
display bgp vpnv6 vpn-instance
vpn-instance-name routing-table
[ network-address prefix-length
[ longer-prefixes ] | peer ipv6-address
{ advertised-routes | received-routes } ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
For routing table display commands, see Layer 3—IP Routing Command Reference.