HP 10500 series User Manual

Ste
p
Command Remarks
3. Redistribute the VPN
routes.
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | route-policy
route-policy-name ] *
By default, no route of any
other routing protocol is
redistributed into RIPng.
4. Configure the default cost
value for the redistributed
routes.
default cost value
Optional.
0 by default.
5. Return to system view.
quit N/A
6. Enter interface view.
interface interface-type interface-number N/A
7. Enable the RIPng process
on the interface.
ripng process-id enable Disabled by default.
Configuring OSPFv3 between IPv6 MCE and PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an OSPFv3
process for an IPv6 VPN
instance and enter
OSPFv3 view.
ospfv3 [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Set the router ID.
router-id router-id N/A
4. Redistribute the VPN
routes.
import-route protocol [ process-id |
allow-ibgp ] [ cost value | route-policy
route-policy-name | type type ] *
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
5. Configure a filtering policy
to filter redistributed
routes.
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ bgp4+ |
direct | isisv6 process-id | ospfv3
process-id | ripng process-id | static ]
Optional.
By default, redistributed routes
are not filtered.
6. Return to system view.
quit N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable the OSPFv3
process on the interface.
ospfv3 process-id area area-id
[ instance instance-id ]
Disabled by default.
Configuring IPv6 IS-IS between IPv6 MCE and PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an IS-IS process
for an IPv6 VPN
instance and enter IS-IS
view.
isis [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Configure a network
entity title.
network-entity net Not configured by default.

HP 10500 series Specifications

General

Brand	HP
Model	10500 series
Category	Switch
Language	English