HP 1650B

SWAVeform
SWAVeform
selector
The SWAVeform (State Waveform) selector is used as part of a
compound header to access the settings in the State Waveform menu. It
always follows the MACHine selector because it selects a branch directly
below the MACHine level in the command tree.
Command Syntax:
:MACHine{l IP}:SWAVeform
Example: OUTPUT XXX;"
:MACHINEZ:SWAVEFORM:RANGE 40"
HP 1650B/HP 16518
Programming Reference
SWAVeform Subsystem
14-3