HP 1650B

Accumulate
Accumulate
Command Syntax:
Example:
Query Syntax:
Returned Format:
Example:
SWAVeform Subsystem
14-4
command/query
The Accumulate command allows you to control whether the waveform
display gets erased between individual runs or whether subsequent
waveforms are allowed to be displayed over the previous waveforms.
The Accumulate query returns the current setting. The query always
shows the setting as the character “0” (off) or "1" (on).
:MACHine{l12}:SWAVeform:ACCumulate {{ON 1 1) 1 (OFF 1 0))
OUTPUT XXX;" :MACHINEl:SWAVEFORM:ACCUMULATE ON"
MACHine{ 1 12}:SWAVeform:ACCumulate?
[MACHine{ 112}:SWAVeform:ACCumulate]
(0 1 1) c NL>
10 DIM String$[lOO]
20 OUTPUT XXX;":MACHINEl:SWAVEFORM:ACCUMULATE?"
30 ENTER XXX; String$
40 PRINT Stringf
50 END
HP 1650B/HP 1651B
Programming Reference