HP 1650B

DELay
DELay
Command Syntax:
where:
c number of
- -
samples>
Example:
Query Syntax:
Returned Format:
Example:
HP 1650B/HP 16518
Programming Reference
command/query
The DELay command allows you to specify the number of samples
between the state trigger and the horizontal center of the screen for the
waveform display. The allowed number of samples is from -1023 to
+ 1024.
The DELay query returns the current sample offset value.
:MACHine{ 1IP):SWAVeform:DELay
-z number of
- -
samples >
:: = integer from -1023 to + 1024
OUTPUT XXX;":MACHINEZ:SWAVEFORM:DELAY 127"
MACHine(l12):SWAVeform:DELa)
[MACHine{ IP}:SWAVeform:DELayJ <number of samples> -zNL>
- -
10 DIM String$[lOO]
20 OUTPUT XXX;":MACHINEl:SWAVEFORM:DELAY?"
30 ENTER XXX;String$
40 PRINT String$
50 END
SWAVeform Subsystem
14-5