HP 1650B

AMODe
AMODe
Command Syntax:
where:
c acquisition-mode >
Example:
Query Syntax:
Returned Format:
Example:
TTRace Subsystem
18-4
command/query
The AMODe command allows you to select the acquisition mode used for
a particular timing trace. The acquisition modes available are
TRANsitional and GLITch.
The Ah4ODe query returns the current acquisition mode.
:MACHine{ 1 IP}:TTRace:AMODe <acquisition-mode >
:: = { GLlTch 1 TRANsitional}
OUTPUT XXX; “:MACHINEl:TTRACE:AMODE GLITCH”
:MACHinel:TTFtace:AMODe?
[:MACHinel:TTRace:AMODe] {GLITCH~TFtANSITIONAL}
10 DIM M$[lOO]
20 OUTPUT XXX; ":MACHINEl:TTRACE:AMODE?"
30 ENTER XXX;M$
40 PRINT M$
50 END
HP 1850B/HP 18518
Programming Reference